Length

50.0 meters. When touch panels of Automatic Officiating Equipment are used on the starting end, or additionally on the turning end, the pool must be of such length that ensures the required distance of 50.0 meters between the two panels.

25.0 meters. When touch panels of Automatic Officiating Equipment are used on the starting end, or additionally on the turning end, the pool must be of such length that ensures the required distance of 25.0 meters between the two panels.

Dimensional Tolerances

Against the nominal length of 50.0 meters, a tolerance of plus 0.03 metre in each lane minus 0.00 metre on both end walls at all points from 0.3 metre above to 0.8 metre below the surface of the water is allowed. These measurements should be certified by a surveyor or other qualified official, appointed or approved by the Member in the country in which the pool is situated. Tolerances cannot be exceeded when touch panels are installed.

Against the nominal length of 25.0 meters, a tolerance of plus 0.03 metre in each lane minus 0.00 metre on both end walls at all points from 0.3 metre above to 0.8 metre below the surface of the water is allowed. These measurements should be certified by a surveyor or other qualified official, appointed or approved by the Member in the country, in which the pool is situated. Tolerances cannot be exceeded when touch panels are installed.

Depth

A minimum depth of 1.35 metes, extending from 1.0 metre to at least 6.0 meters from the end wall is required for pools with starting blocks. A minimum depth of 1.0 metre is required elsewhere.

(BOCOG)